What preparatory work should be done before Jiangmen aerial equipment rental aerial vehicle operation
Jiangmen aerial equipment rental company warm tips:
What kind of preparation work should be done before the aerial work vehicle runs?
1. Read the manual carefully before operation to understand the driving and operating requirements and master the driving performance parameters of the whole vehicle.
2. Check the oil level and water level of the chassis according to the requirements of the chassis before driving.
3. Check the fuel tank oil level. (fuel consumption for aerial and lifting operations to be considered)
4. Check the hydraulic oil level to ensure the liquid level
The oil quantity in the pressure box reaches the specified value.
5. Check whether the upper and lower arms are in place and should not be suspended in the air.
6. Check whether there are missing tools or articles in the working platform, and if so, remove them in time. When the vehicle is running, there are no fixed objects placed inside the working platform.
7. Check whether the outrigger is fully retracted.
8. Check whether the power take-off control lever has separated the power take-off gear from the vehicle gearbox.
Source: Jiangmen high altitude equipment rental http://www.jmzhongte.com
-
04-23
Common faults and repair methods of hoisting equipment rental in Guangdong
Guangdong lifting equipment in the operation, it is inevitable to encounter crane failure and affect the use of the situation, then the fault maintenance has become a necessary means of disposal. There are three kinds of common faults of Guangdong hoisting equipment rental crane, and the correspondi
-
04-23
What are the advantages of aerial vehicle in aerial vehicle operation
Specific configuration of aerial work vehicle: Hydraulic 360 ° full rotation, three folding arms, single hydraulic lifting cylinder, with bidirectional balance valve. Electrically operated boom. With 1 ton retractable hook, four hydraulic cylinders, adjustable legs, with two-way hydraulic lock (out
-
04-13
Analysis of the reason why the electric hoist of Guangdong hoisting equipment can not operate
Guangdong lifting equipment electric hoist can not run the reason analysis 1, can first check the equipment power fuse is burned, if one phase, so its electric hoist can not rotate, the starting torque of the crane electric hoist is zero, so the motor of the equipment will not run, it is necessary to replace enough fuse. 2. What's more, the voltage of the power grid is too low, so the dynamic torque of the equipment is proportional to the square of the voltage. The acceleration torque can not ov
-
04-13
Jiangmen high altitude equipment rental tells you the harm of overload operation
The excessive stress caused by overload operation of Jiangmen high-altitude equipment can break the wire rope, damage the transmission parts and burn the motor. Due to the insufficient braking force, the brake can not hold the brake, which will cause serious accidents. Overload operation has great damage to the crane structure, such as the main beam deflection, cracks and desoldering on the upper cover plate and web plate, which brings serious accident risks to the high-altitude equipment operat